GENERAL INFORMATION
Aluminium folding door with thermally-separated frame-lattice design. Design depth of 60 mm. Wall thickness of at least 2 mm. 
Frame profiles are bolted together and glued to the leaves of the folding door using mitres. 50 mm finger-pinch protective rubber between the door leaves. Panels made of aluminium or insulating glass. The door leaves are suspended by horizontally-guided roller units and plastic-covered track rollers. The track rollers and door leaves are supported by dust-proof, maintenance-free ball bearings.
Adjustable hinges and guide bolts that are 20 mm thick. Covered bolt lock. Creating an opening for people to pass through occurs with no loss in stability. More Info

SIZES
- maximum width of door leaves: 1300 mm (door width: 6 + 6 = 15600 mm) 
- maximum height of door leaves: 5600 mm

GLAZING
Insulating tempered glass of up to 2 m2 – continuous – per door leaf. Complete glazing of doors is possible. Glazing as dry glazing with rubber sealing on both sides.

PANELS
1 mm thick aluminium sheets glued to 30 mm of rigid-foam styrofoam. Attached by means of clamped aluminium holding strips. Panels can be replaced easily.

SURFACE FINISH
- powder-coated with façade quality, standard colour of your choice 
- anodised with A6/C0

OPERATION
- manually operated
- power-operated with folding door drive BASIC or POWER